Sinch Data processor
This Data Protection Addendum (“DPA”) is entered into pursuant to the (“Agreement”) between Sinch AB (“Sinch”) and (“Customer”). In the absence of an executed Agreement between the parties, the current Terms of Service at https://www.sinch.com/legal/terms-of-service/ (or such other URL as may be determined by Sinch from time to time) shall apply to this DPA.
This DPA becomes effective upon the later of i) the date of execution by which both parties execute this DPA or ii) May 25, 2018.
Customer shall make available to Sinch and Customer authorizes Sinch to process information including personal data for the provision of the Services under the Agreement. The parties have agreed to enter into this DPA to confirm the data protection provisions relating to their relationship and so as to meet the requirements of applicable Privacy Laws.
1.1 For the purposes of this DPA:
“Sinch Affiliate” means any entity that directly or indirectly controls, is controlled by, or is under common control with Sinch. “Control,” for purposes of this definition, means direct or indirect ownership or control of more than 50% of the voting interests of the subject entity;
“Privacy Laws” mean any applicable law relating to data protection and security, including without limitation EU Data Protection Directive (EU Directive 95/46/EC of the European parliament and of the council of 24 October 1995 on the protection of individuals with regard to the processing of personal data and on the free movement of such data), Directive on privacy in electronic communications (Directive 2002/58/EC of the European Parliament and of the Council of 12 July 2002 concerning the processing of personal data and the protection of privacy in the electronic communications sector) and General Data Protection Regulation (Regulation 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 94/46/RC) (“GDPR”) and any amendments, replacements or renewals thereof (collectively the “EU Legislation”), all binding national laws implementing the EU Legislation and other binding data protection or data security directives, laws, regulations and rulings valid at the given time including any guidance and codes of practices issued by the applicable supervisory authority;
“Security Directives” means all agreed applicable security requirements and security instructions and their updates applicable at each time and described in Appendix 1.
The terms “data controller“, “data processor“, “data subject“, “personal data” “processing” and “appropriate technical and organisational measures” shall have the meanings given to them under applicable Privacy Laws.
1.2 Capitalized terms used and not defined in this DPA have the meanings given such terms in the Agreement.
2. Subject matter, nature and purpose of Sinch’s processing of personal data
2.1 The subject matter, nature and purpose of the processing of personal data under this DPA is Sinch performance of the Services pursuant to the Agreement and as further instructed in writing by the Customer in its use of the Services, unless required to do so otherwise by Privacy Laws, in which case to the extent permitted by Privacy Laws, Sinch shall inform the Customer of this legal requirement prior to carrying out the processing. Sinch shall only collect or process personal data for the duration of the Agreement to the extent, and in such a manner, as is necessary for provision of the Services and in accordance with the Agreement and Privacy Laws applicable to Sinch in its role as data processor.
2.2 Sinch shall process personal data originating from and sent to a country located in the EU/EEA or Switzerland solely in countries situated in the EU/EEA or Switzerland and not cause any cross border transfer of personal data from a country situated in the EU/EEA or Switzerland to any country situated outside the EU/EEA or Switzerland unless personal data is transferred to a country approved by the European Commission as providing an adequate level of protection for personal data, the transfer is made pursuant to European Commission approved standard contractual clauses for the transfer of Personal Data for which the Customer provides a power of attorney for Sinch to enter into any such European Commission approved standard contractual clauses with a Sub-processor approved as set out in clause 8 in the name and on behalf of the Customer.
3.1 The processing of personal data will be carried out by Sinch for the duration of the Agreement unless otherwise agreed upon in writing.
4 Type of personal data processed
4.1 The Customer may submit Customer personal data to the Services, the extent of which is determined and controlled by the Customer in its sole discretion, and which may include, but is not limited to the following categories of personal data:
- Contact information (company, email, phone, physical address)
- First and last name
- ID data
- Connection data
- Localisation data
5 Type of data subjects
5.1 The Customer may submit personal data to the Services, the extent of which is determined and controlled by the Customer in its sole discretion, and which may include, but is not limited to personal data relating to the following categories of data subject:
- Customers, business partners and vendors of the Customer (who are natural persons)
- Employees of contact persons of the Customer’s customers, business partners and vendors
- Employees, agents, advisors, freelancers of the Customer (who are natural persons)
- Customer’s Service user including any user of the Services, which Customer permits using the Services
6 Technical and organisational measures
6.1 Sinch has implemented and maintains appropriate technical and organizational measures in accordance with Article 28, 3 (c) and Article 32 in particular in relation with Article 5, 1 and 2 GDPR. Such measures include but not limited to physical and IT measures, and organizational measures to protect personal data processed against unauthorized or unlawful processing and against accidental loss, destruction, damage, alteration or disclosure. Such measures, as described in the Security Directives, and provide a level of security that is appropriate to the risks of the processing having regard to:
ii) the costs of implementation;
iii) the nature, scope, context and purposes of processing, including the type of personal data; and
iv) risk for the rights and freedoms of natural persons that personal data relate to.
6.2 The Technical and Organisational Measures are subject to technical progress and further development. In this respect Sinch may implement alternative adequate measure, however, the security level of the defined measures must never be reduced. Major changes must be documented.
7 Quality assurances and other duties of Sinch
7.1 Sinch shall comply with the mandatory requirements referred to in Articles 28 to 33 GDPR, and ensures in particular compliance with the following requirements:
a) Appoint a data protection officer, who performs his/her duties in compliance with Articles 38 and 39 GDPR. The data protection officers contact details are available at Sinch web page.
b) Confidentiality in accordance with Article 28, 3 (b), Articles 29 and 32 (4) GDPR. Sinch entrusts only such employees with the data processing outlined in this contract who have been bound to confidentiality and have previously been familiarized with the data protection provisions relevant to their work. Sinch and any person acting under its authority who has access to personal data, shall not process that data unless on instructions from the Customer, which includes the powers granted in this Amendment, unless required to do so by Privacy Laws.
c) At the Customer’s cost and expense and taking into account the nature of the processing and the information available to Sinch, provide such information and assistance as the Customer may reasonably require and within the timescales reasonably specified by the Customer to assist the Customer to comply with its obligations under applicable Privacy Laws which may include assisting the Customer to:
d) Unless prohibited by applicable law or a legally binding request of law enforcement, Sinch shall promptly notify the Customer of any request by, any government official, data protection supervisory authority or law enforcement authority in respect of any personal data;
e) Sinch shall periodically monitor the internal processes and the Security Directives to ensure that processing within Sinch area of responsibility is in accordance with the requirements of Privacy Laws and the protection of the rights of the data subject.
8.1 The Customer agrees that Sinch may engage Sinch Affiliate or third parties to process personal data in order to assist Sinch to deliver the Services on behalf of the Customer (“Sub-processors”). Sinch has or will enter into written agreement with each Sub-processor containing data protection obligations not less protective than those in this DPA to the extent applicable to the nature of the Services provided by such Sub-processor. If the Sub-processor processes the Services outside the EU/EEA, Sinch shall ensure that the transfer is made pursuant to European Commission approved standard contractual clauses for the transfer of Personal Data which the Customer authorizes Sinch to enter into on its behalf, or that other appropriate legal data transfer mechanisms are used.
8.2 The current Sub-processors for the Services are set out at https://www.clxcommunications.com/data-protection/sub-processors/ (“Sub-processor List”) and the Customer agrees and approves that Sinch has engaged such Sub-processors to process personal data as set out in the list. The Customer may find at https://www.clxcommunications.com/data-protection/sub-processors/ a mechanism to subscribe to notifications of new Sub-processors for each applicable Service, to which Customer shall subscribe, and if the Customer subscribes, Sinch shall provide notification of a new Sub-processor(s) before authorising any new Sub-processor(s) to process personal data in connection with the provision of the applicable Service.
8.3 Sinch shall notify the Customer, in accordance with the mechanism set out in clause 2, thirty (30) days’ in advance of any intended changes concerning the addition or replacement of any Sub-processor during which period the Customer may raise objections to the Sub-processor’s appointment. Any objections must be raised promptly (and in any event no later than fourteen (14) days following Sinch’s notification of the intended changes). Should Sinch choose to retain the objected to Sub-processor, Sinch will notify the customer at least fourteen (14) days before authorising the Sub-processor to process personal data and then the Customer may immediately discontinue using the relevant portion of the Services and may terminate the relevant portion of the Services. Sinch will refund the Customer any prepaid fees covering the remainder of the term of such relevant portion of the Service following the effective date of termination and there will be no penalty on either party.
8.4 For the avoidance of doubt, where any Sub-processor fails to fulfil its obligations under any sub-processing agreement or under applicable law Sinch will remain fully liable to the Customer for the fulfilment of its obligations under this DPA.
9 Audits and inspections
9.1 In the event that the Customer, a regulator or data protection authority requires additional information or an audit related to the Services, then, Sinch agrees to submit its data processing facilities, data files and documentation needed for processing personal data to audit by the Customer (or any third party such as inspection agents or auditors, selected by Customer) to ascertain compliance with this DPA, subject to being given reasonable notice and compliance with Sinch’s Security Directives and the auditor entering into a non-disclosure agreement directly with Sinch. Sinch agrees to provide reasonable cooperation to Customer in the course of such operations including providing all relevant information and access to all equipment, software, data, files, information systems, etc. used for the performance of Services, including processing of personal data. Such audits shall be carried out at the Customer’s cost and expense.
10 notification of a data breach
10.1 In the event of Sinch aware of any breach of security that results in the accidental, unauthorised or unlawful destruction or unauthorised disclosure of or access to personal data Sinch shall, among other things:
a) Notify the Customer in writing immediately but not later than 36 hours after becoming aware of the breach of security
b) Assist the Customer with regard to the Customers obligation to provide information to the data subject and to provide the Customer with relevant information in this regard
c) Support the Customer in consultations with data protection authority.
10.2 To the extent legally possible, Sinch may claim compensation for support services under this clause 10 which are not attributable to failures on the part of Sinch.
10.3 Customer shall retain all rights, copyright or other intellectual property rights, title and interest to any and all personal data, including all rights relating to databases. Sinch understands and agrees that such personal data constitutes Customer proprietary and Confidential Information.
11 deletion and return of personal data
11.1 Upon expiration of the Agreement or in the event of early termination for any reason whatsoever, Sinch and its subcontractors shall promptly provide to Customer all personal data held by them for the duration of the Agreement for the performance of the Services. Upon Customer’s request, Sinch will destroy copies of personal data held in its systems and confirm this to Customer in writing unless required to keep certain personal data in order to comply with applicable laws.
12 customer’s Obligations
12.1 The Customer shall comply at all times with applicable Privacy Laws in relation to the processing of personal data in connection with the Agreement and the Services.
13 limitation of liability
13.1 Each party’s and all of its Affiliates’ liability, taken together in the aggregate, arising out of or related to this DPA whether in contract, tort or under any other theory of liability, is subject to the Limitation of Liability section of the Agreement, and any reference in such section to the liability of a party means the aggregate liability of that party and all of its Affiliates under the Agreement and this DPA.
Appendix 1 to the data protection addendum
Description of the technical and organizational measures implemented by Sinch:
Sinch shall implement the measures described in this appendix, provided that the measures directly or indirectly contribute or can contribute to the protection of personal data under the agreement concluded between the Parties for the processing of data. If Sinch believes that a measure is not necessary for the respective Service or part thereof, Sinch will justify this and come to an agreement with the Customer.
The technical and organisational measures are subject to technical progress and development. In this respect Sinch is permitted to implement alternative adequate measures. The level of security must align with industry security best practice and not less than, the measures set forth herein. All major changes are to be agreed with the Customer and documented.
1. Risk management
1.1 Security risk management
a. Sinch shall identify and evaluate security risks related to confidentiality, integrity and availability and based on such evaluation implement appropriate technical and organizational measures to ensure a level of security which is appropriate to the risk.
b. Sinch shall have documented processes and routines for handling risks within its operations.
c. Sinch shall periodically assess the risks related to information systems and processing, storing and transmitting information.
1.2 Security risk management for personal data
a. Sinch shall identify and evaluate security risks related to confidentiality, integrity and availability and based on such evaluation implement appropriate technical and organizational measures to ensure a level of security which is appropriate to the risk of the specific personal data types and purposes being processed by Sinch, including inter alia as appropriate:
(i) The pseudonymisation and encryption of personal data
(ii) The ability to ensure the ongoing confidentiality, integrity, availability and resilience of processing systems and services
(iii) The ability to restore the availability and access to the Customer’s Data in a timely manner in the event of a physical or technical incident
(iv) A process for regularly testing, assessing and evaluating the effectiveness of technical and organizational measures for ensuring the security of the processing
b. Sinch shall have documented processes and routines for handling risks when processing personal data on behalf of the Customer.
c. Sinch shall periodically assess the risks related to information systems and processing, storing and transmitting personal data.
2. Information security policies
2.1 Sinch shall have a defined and documented information security management system (ISMS) including an information security policy and procedures in place, which shall be approved by Sinch’s management. They shall be published within Sinch´s organization and communicated to relevant Sinch Personnel.
2.2 Sinch shall periodically review Sinch’s security policies and procedures and update them if required to ensure their compliance with the Security Directives.
3. Organization of information security
3.1 Sinch shall have defined and documented security roles and responsibilities within its organization.
3.2 Sinch shall appoint at least one data protection officer who has appropriate security competence and who has an overall responsibility for implementing the security measures under the Security Directives and who will be the contact person for the Customer’s security staff.
4. Human resource security
4.1 Sinch shall ensure that Sinch personnel handles information in accordance with the level of confidentiality required under the Agreement.
4.2 Sinch shall ensure that relevant Sinch personnel is aware of the approved use (including use restrictions as the case may be) of information, facilities and systems under the Agreement.
4.3 Sinch shall ensure that any Sinch personnel performing assignments under the Agreement is trustworthy, meets established security criteria and has been, and during the term of the assignment will continue to be, subject to appropriate screening and background verification.
4.4 Sinch shall ensure that Sinch personnel with security responsibilities is adequately trained to carry out security related duties.
4.5 Sinch shall provide or ensure periodical security awareness training to relevant Sinch personnel. Such Sinch training shall include, without limitation:
a. How to handle customer information security (i.e. the protection of the confidentiality, integrity and availability of information);
b. Why information security is needed to protect customers information and systems;
c. The common types of security threats (such as identity theft, malware, hacking, information leakage and insider threat);
d. The importance of complying with information security policies and applying associated standards/procedures;
e. Personal responsibility for information security (such as protecting customer’s privacy-related information and reporting actual and suspected data breaches).
5. Access control
5.1 Sinch shall have a defined and documented access control policy for facilities, sites, network, system, application and information/data access (including physical, logical and remote access controls), an authorization process for user access and privileges, procedures for revoking access rights and an acceptable use of access privileges for Sinch personnel in place.
5.2 Sinch shall have a formal and documented user registration and de-registration process implemented to enable assignment of access rights.
5.3 Sinch shall assign all access privileges based on the principle of need-to-know and principle of least privilege.
5.4 Sinch shall ensure that Sinch Personnel has a personal and unique identifier (user ID), and use an appropriate authentication technique, which confirms and ensures the identity of users.
6.1 Sinch shall ensure proper and effective use of cryptography on information classified as confidential and secret (such as personal data).
6.2 Sinch shall protect cryptographic keys.
7. Physical and environmental security
7.1 Sinch shall protect information processing facilities against external and environmental threats and hazards, including power/cabling failures and other disruptions caused by failures in supporting utilities. This includes physical perimeter and access protection.
7.2 Sinch shall protect goods received or sent on behalf of the Customer from theft, manipulation and destruction.
8. Operations security
8.1 Sinch shall have an established change management system in place for making changes to business processes, information processing facilities and systems. The change management system shall include tests and reviews before changes are implemented, such as procedures to handle urgent changes, roll back procedures to recover from failed changes, logs that show, what has been changed, when and by whom.
8.2 Sinch shall implement malware protection to ensure that any software used for Sinch’s provision of the Services to the Customer is protected from malware.
8.3 Sinch shall make backup copies of critical information and test back-up copies to ensure that the information can be restored as agreed with the Customer.
8.4 Sinch shall log and regularly review activities towards processed data. Anomalies / incidents / indicators of compromise shall be reported according to the data breach management requirements as set out in clause 13, below.
8.5 Sinch shall manage vulnerabilities of all relevant technologies such as operating systems, databases, applications proactively and in a timely manner.
8.6 Sinch shall ensure development is segregated from test and production environment.
9. Communications security
10. System acquisition, development and maintenance (when software development or system development is provided to the Customer by Sinch)
10.1 Sinch shall implement rules for development lifecycle of software and systems including change and review procedures.
10.2 Sinch shall test security functionality during development in a controlled environment.
11. Sinch relationship with sub-suppliers
11.1 Sinch shall reflect the content of these Security Directives in its agreements with Sub-processors that perform tasks assigned under the Agreement.
11.2 Sinch shall regularly monitor, review and audit Sub-processor’s compliance with the Security Directives.
11.3 Sinch shall, at the request of the Customer, provide the Customer with evidence regarding Sub-processor’s compliance with the Security Directives.
12. Data breach management
12.1 Sinch shall have established procedures for data breach management.
12.2 Sinch shall inform the Customer about any data breach (including but not limited to incidents in relation to the processing of personal data) as soon as possible but no later than within 36 hours after the data breach has been identified.
12.3 All reporting of security related incidents shall be treated as confidential information and be encrypted, using industry standard encryption methods.
12.4 The data breach report shall contain at least the following information:
a. The nature of the data breach,
b. The nature of the personal data affected,
c. The categories and number of data subjects concerned,
d. The number of personal data records concerned,
e. Measures taken to address the data breach,
f. The possible consequences and adverse effect of the data breach, and
g. Any other information the Customer is required to report to the relevant regulator or data subject.
12.5 To the extent legally possible, Sinch may claim compensation for support services under this clause 13 which are not attributable to failures on the part of Sinch.
13. Business continuity management
13.1 Sinch shall identify business continuity risks and take necessary actions to control and mitigate such risks.
13.2 Sinch shall have documented processes and routines for handling business continuity.
13.3 Sinch shall ensure that information security is embedded into the business continuity plans
13.4 Sinch shall periodically assess the efficiency of its business continuity management, and compliance with availability requirements (if any).